How do I reprogram my winch wireless remote?

Updated 2 months ago ​by Scott Henning

  1. Press and hold the ON/OFF button for 3 seconds (LED will turn on) to turn the remote ON.
  2. Press and hold the IN and OUT buttons for 20 seconds (LED will flash 1X per second) to clear current programming.
  3. Release the IN and OUT buttons after 20 flashes when LED is on steady (not flashing).
  4. Press and hold the IN and OUT buttons for 3 seconds. LED will turn off and then back on. When the LED is back on, the remote has been programmed.

How did we do?