Base Plate Screw Adjustment

Updated 1 week ago by Juan Velez

This bulletin covers the following Champion Power Equipment water pumps: C44020 (2"), C45530 (3"), C49040 (4"), and C46530 (3") Semi-Trash Pump.

Read instructions carefully before performing the service.
  1. Remove the pump housing and spiral casing.
    Models C44020, C455030: Remove the four 14 mm hex head bolts holding the pump housing to the main assembly. 
    Model C49040: Remove the four 17 mm hex head bolts holding the pump housing to the main assembly and the two 12 mm hex head bolts holding the pump housing to the frame.
    Model C46530: Remove the four T bolts holding the pump housing to the main assembly.
  2. Rotate the impeller counterclockwise to remove.
  3. Remove the four - 6 mm Allen head bolts holding the base plate to the engine assembly. 
  4. Coat the threads of the Allen head bolts with Locktite and reinstall. 
  5. Reattach the impeller to the crankshaft. Replace the spiral casing and pump housing. Insert and tighten the 4 hex pump housing bolts. 

View and download the PDF version here.


How did we do?